MARTIN MAC Aura XIP

Descriptions détaillées

FEATURES

LIGHT SOURCE

• 6,000 lumens RGBW light output
• High narrow intensity: 360,000 cd
• Pixelated Beam: 7x 60W RGBW LEDs
• Filament Aura: 12x 4W RGBW LEDs
• Fully calibrated using Martin's Full Gamut Color Calibration
• Flicker-Free operation – LED driver frequency suitable for all kinds of camera applications
• LED Driver frequency adjustable for demanding applications

OPTICS

• Tight beam and beautiful wash field
• 6.3 – 50.4? zoom – Precise, silent and fast zoom
• Even soft edge wash field with zero hotspot
• High intensity mid-air beams
• Minimal stray light
• Minor color temperature shift from center to edge

SOFTLENS ACCESSORY INCLUDED

• Creates an even softer edge wash field
• Minimal impact to Aura filament effects
• Attaches to front of fixture
• Can remain attached to fixture inside flightcase SiP

COLOR PALETTE

• RGBW color mixing with very bright and vibrant saturated colors, as well as soft pastels and white tones
• Calibrated and Extended Color Modes
• Calibrated CTC control: 1,000 – 12,850 K
• Green Magenta Shift (Tint) Control
• Tungsten Emulation Option
• Virtual Color Wheel

DYNAMIC EFFECTS

• More than 200 built-in FX macros with control of foreground color, background color, speed and direction
• P3 video mapping of fixture Beam pixels and/or Aura filaments
• P3 Mix allowing crossfade between video looks and DMX looks
• High-speed pan, tilt and zoom

COOLING AND NOISE

• Ultra-quiet cooling system
• Theater / Broadcast mode at just 25.2 dB(A)
• Low noise pan/tilt and effects operation

CONSTRUCTION

• Smart outdoor rating for any weather condition
• Weight 8.95 kg (19.73 lbs.)
• Dimensions: 338 x 380 x 226 mm

CONTROL

• Battery-powered control panel on the base
• DMX in & thru
• Ethernet in & thru, supporting Art-Net, sACN & Martin P3
• Fail-safe bypass on Ethernet ports
• RDM over DMX and RDM over Art-Net

SPECIFICATIONS

PHYSICAL

• Width (across yoke): 338 mm (13.31 in.)
• Width (base): 306 mm (12.05 in.)
• Height (head straight up): 380 mm (14.96 in.)
• Height (maximum): 421 mm (16.57 in.)
• Depth (head): 205 mm (8.07 in.)
• Depth (base): 226 mm (8.90 in.)
• Minimum center-to-center distance in side-by-side installation: 350 mm (13.78 in.)
• Weight: 8.95 kg (19.73 lbs)

DYNAMIC EFFECTS

• Beam Dimmer/Shutter: 0 - 100% continuous dimming, regular and random strobe, instant open and blackout
• Beam Dimming options: Choice of four dimming curves
• Beam Color Mixing: RGB, independently variable 0 - 100%
• Beam Color Temperature Control: Variable 1,000 – 12,850 K
• Beam Tint Control: Variable green-magenta shift
• Beam Virtual Color wheel: 48 color presets, continuous rotation & random color
• Zoom: Motorized with 1:6 zoom ratio
• Pan: Motorized 540°
• Tilt: Motorized 220°
• Beam PixelMapping: individual RGB control of each of the 7 Beam pixels
• Beam P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
• Aura Dimmer/Shutter: 0 – 100% continuous dimming, regular and random strobe effects, instant open and blackout
• Aura Dimming options: Choice of four dimming curves
• Aura Color Mixing: RGB, independently variable 0 - 100%
• Aura Color Temperature Control: Variable 1,000 – 12,850 K
• Aura Tint Control: Variable green-magenta shift
• Aura Virtual Color wheel: 48 color presets, continuous rotation & random color
• Aura PixelMapping: individual RGB control of each of the 12 Aura filaments
• Aura P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
• Pre-programmed effects: Two ranges of FX on Beam, Aura or Combination; independent or synchronized/combined
• LED Frequency control: Variable LED PWM control

CONTROL AND PROGRAMMING

• Control Protocols: DMX, RDM, Art-Net, RDM over Art-Net, sACN and P3
• Protocol Detection: Automatic
• DMX Modes: Compact, Basic, Extended & Ludicrous
• DMX Channels: 20, 36, 57 & 93
• 16-bit Controllable Parameters: Beam & Aura Dimming, Beam Color Mixing, Zoom, Pan and Tilt
• Setting and Addressing: Display Menu, RDM, RDM over Art-Net or P3
• Local User Interface: Backlit LCD Display with battery-powered operation
• Fixture identification: User-settable ID number
• DMX Compliance: USITT DMX512-A
• RDM Compliance: ANSI/ESTA E1.20
• Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
• sACN Compliance: ANSI E1.31 - 2016
• Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer
• DMX/RDM Transceiver: Galvanic-isolated RS-485
• Ethernet Transceiver: 10/100Mbit (with fail-safe bypass)
• Firmware Update: via USB type C memory device, via DMX using Martin Companion or via Ethernet using P3 System Controller

OPTICS

• Front Lens Diameter: 196 mm (7.72 in.)
• Zoom Range: 1:6
• Full Zoom Range at Half Peak (Beam Angle): 6.3° - 35.3°
• Full Zoom Range at Tenth Peak (Field Angle): 8.8° - 50.4°
• Beam Light Source: 7 x 60 W RGBW LED
• Aura Light Source: 12 x 4 W RGBW LED
• Max. Total Beam LED Engine Power: 296.5 W
• Max. Total Aura LED Engine Power: 35.1 W
• Minimum LED lifetime: > 50.000 hours (to > 70% luminous output)*

*Figure obtained under manufacturer's test conditions

PHOTOMETRIC DATA

• Light Engine Luminous Output: 11,000 lumens
• Fixture Luminous Output Wide: 6,000 lumens
• Fixture Luminous Output Narrow: 4,500 lumens
• Peak Luminous Intensity Narrow: 360,000 cd
• CCT: Variable 1,000 K – 12,850 K (+/- 200 K)
• CRI (Color Rendering Index) high output mode: ≥ 71
• CRI (Color Rendering Index) high quality mode: ≥ TBC
• CQS (Color Quality Scale) high output mode: ≥ 80
• CQS (Color Quality Scale) high quality mode: ≥ TBC
• TM-30 Rf (IES TM-30-15 Fidelity Index) high output mode: ≥ 78
• TM-30 Rf (IES TM-30-15 Fidelity Index) high quality mode: ≥ TBC
• TM-30 Rg (IES TM-30-15 Gamut Index) high output mode: ≥ 117
• TM-30 Rg (IES TM-30-15 Gamut Index) high quality mode: ≥ TBC
• TLCI (Television Lighting Consistency Index) high output mode: ≥ 57
• TLCI (Television Lighting Consistency Index) high quality mode: ≥ TBC
• Beam LED Refresh Rate: variable 2,400 Hz - 3,000 Hz and 24,000 Hz mode
• Aura LED Refresh Rate: 1,200 Hz
• Binning: Tight color and flux binning
• Calibration: Full Gamut Color Calibration of Beam and Aura
• Color Modes: Extended Color Mode and Calibrated Color Mode

* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient

CONSTRUCTION

• Housing: High-impact flame-retardant thermoplastic
• Color: Black
• Protection rating: IP54

INSTALLATION

• Mounting points: 2 pairs of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega brackets and single M12 threaded hole for rigging clamp
• Location: Indoor or Temporary Outdoor use
• Orientation: Any, except with display facing upwards in outdoor application
• Minimum distance to combustible materials: 0.2 m (7.87 in.)
• Minimum distance to illuminated surfaces: 1.0 m (39.37 in.)

CONNECTIONS

• Firmware from flash memory: USB 2.0 type C port
• AC mains power in/thru: Neutrik powerCON TRUE1 TOP
• DMX and RDM data in/thru: Neutrik 5-pin locking XLR TOP
• Ethernet (Art-Net, sACN and P3) in/thru, including fail-safe bypass: Neutrik etherCON TOP

ELECTRICAL

• AC power: 100-240 V AC nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch mode
• Typical half-cycle RMS inrush current at 230 V, 50 Hz: 7.0 A
• Typical earth-leakage current: 0.43 mA
• Power Factor: 0.99 @ 100 V / 120 V , 0.97 @ 208 V / 230 V / 240 V
• Max current draw: 3.9 A @ 100 V / 120 V , 1.8 A @ 208 V / 230 V / 240 V
• Typical current draw: 2.9 A @ 100 V , 2.4 A @ 120 V , 1.4 A @ 208 V , 1.3 A @ 230 V , 1.2 A @ 240 V *
• Power Consumption
  • Maximum: 340 W
  • Typical: 292 W *
  • Idle: 47 W *
  • Hibernation: 32 W *

* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.
Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

THERMAL

• Cooling: Forced air (temperature regulated, low noise, user-definable levels)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): 5° C (41° F)
• Maximum surface temperature, steady state, at 40° C ambient: 60° C (140° F)
• Total heat dissipation (calculated, +/- 10%): 972 BTU/hr.

ACOUSTIC DATA

• Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 34.4 dB(A)
• Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 25.2 dB(A)
• ENVIRONMENTAL
• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 21.3 lm/W
• LWR*: 670 lm/kg (304 lm/lb)
• LWR = Lumen-to-Weight Ratio

APPROVALS

• Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015; EN 55032; EN 55035; EN 61547; EN 61000-3-3
• US safety: UL 1573
• US EMC: FCC Part 15 Class B
• Canadian safety: CSA C22.2 No. 166
• Canadian EMC: ICES-003 Class B, ICES-005 Class B
• Australia/NZ: RCM
• United Kingdom: UKCA